Kussmaul DC Energy Display, DCE 023-4346-0
The Kussmaul DC Energy Display, DCE 023-4346-0 provides accurate low-cost instrumentation for 3 banks of batteries between 9.5 and 33 volts.
The unit displays voltage for three banks and amps or amp-hours for the house bank. It tracks all current entering and leaving the house bank and applies Peukert's and efficiency factors. Low and High voltage alarms and Low Amo-Hours Remaining alarms can be set on the house bank. When activated, the built-in 85 dB alarm will sound and the display will flash. The DCE outputs NMEA 0183 serial data or the data line can be programmed as an external alarm output or as a charger on-off control. The DCE comes complete with a precision 500 amp shunt and is designed to work with 50-500 amp 50 mV shunts.
Features:
- Displays 12 or 24 volts
- Displays up to 500 amps
- Displays energy used and remaining for up to 3,000 amp-hour capacity
- Monitor voltage on up to three separate banks of batteries
- Monitors Charge / Discharge Amperage
- Monitors Total Energy: Amp-Hours or Percent of Charge
- Alarms: High / low voltage and low amp-Hours remaining
- 3-year warranty
Specifications:
| Warranty | 3 Years |
| Weight | .25 Lbs |
| Power Supply | 9.5 To 33.0 VDC, .018 Amps Nominal |
| Operating Temperature | 32 To 122 F (0 To 50 C) |
| Accuracy | Better Than +/- 0.1 VDC For Volts And 1% +/- 1 Amp For Amps |
| Volts Range | 9.5 To 33.0 VDC |
| Amps Range | -500 To +500 Amps (Applies To Bank 1 Only) |
| Capacity Remaining Range | -0 To +100% (Applies To Bank 1 Only) |
| Shunt | 500 Amp, 50 MV |
| NMEA 0183 | $IIXDR, V; $IIXDRA, A; $IIXDR,G |
| DC Amps | Yes |
| Digital Display | Yes |
| Watertight | Yes |
| DC Volts | Yes |
| Amp Hours | Yes |
| Amp-Hours Range | -500 To +500 Amps (Applies To Bank 1 Only) |
| Alarms | High, Low Voltage & Low Amp-Hours |
